Indexing Pin Coarse Teeth Economical Reset Type/Self-Locking Type

Frequently asked questions about this product

1. How to use and the principle of the reset type indexing pin

Reset type
1) The front end is usually in a protruding state.

2) The front end retracts when the knob is pulled out.

3) If the knob is released, the front end will return to the protruding state due to the built-in spring force.

2. How to use and the principle of the self-locking type indexing pin

Self-locking type
1) The front end is usually in a protruding state.

2) The front end retracts when the knob is pulled out.

3) If you rotate 90° while keeping it pulled out, you can lock the retracted state of the front end.

4) To unlock the locked state, just rotate 90° while keeping it pulled out.

5) If the knob is released, the front end will return to the protruding state due to the built-in spring force.

3. What force load does the load data on the official website of the indexing pin refer to?

Load force of the product pull-out force

4. Can the indexing pin withstand large shear force or radial force?

Cannot withstand large shear force. The indexing pin is an assembly part. There is a large gap between the shell and the inner pin, which may cause bending or breakage risks.